BVYTS - BRIGHTSIDE STEEL GRAY, 4250
- MSDS: BVYTS
- Manufacturer: INTERNATIONAL PAINT CO INC
- Product Name: BRIGHTSIDE STEEL GRAY, 4250
- National Stock Number: 8010-00N054819
Product Identification
Product ID:BRIGHTSIDE STEEL GRAY, 4250
MSDS Date:12/28/1993
FSC:8010
NIIN:00N054819
MSDS Number: BVYTS
Responsible Party
UNION, NJ 07083-5704
US
Emergency Phone: 800-854-6813
Info Phone: 908-686-1300
Cage: 26351
Contractor
Telephone: 800-589-1267/800-854-6813
Cage: 26351
Ingredients
SOLVENT NAPHTHA (PETROLEUM), LIGHT AROMATIC; (AROMATIC
CAS: 64742-95-6
RTECS: WF3400000
Fraction By Weight: 1-5%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
7
CAS: 8032-32-4
RTECS: OI6180000
Fraction By Weight: 30-35%
OSHA PEL 300 PPM
ACGIH TLV: 300 PPM
2
CAS: 64742-88-7
Fraction By Weight: 5-10%
OSHA PEL 100 PPM (MFR)
ACGIH TLV: 100 PPM (MFR)
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:EYES:CAN CAUSE IRRITATION WITH
REDNESS, TEARING AND BLURRED VISION. SKIN:IRRITATING. MAY RESULT IN
DERMATITIS. INHAL:IRRITATION OF RESPIRATORY TRACT, HEADACHE &
DIZZINESS & UNCONSCIOUSNESS. INGE ST:GASTRO-INTESTINAL IRRITATION,
NAUSEA, VOMITING, DIARRHEA.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.
First Aid
First Aid:EYES:FLUSH IMMED W/COPIOUS QTYS OF WATER FOR @ LEAST 15 MINS.
GET MED ATTN IMMED. SKIN:REMOVE CONTAMD CLTHG, WASH W/ PLENTY OF
SOAP & WATER. LAUNDER CLOTHES BEFORE REUSE. INHAL:REMOVE TO FRESH
AIR. GI VE ARTF RESP IF NEEDED. GET MED ATTN. INGEST:CALL PHYS
IMMED TO DETERMINE WHETHER OR NOT TO INDUCE VOMITING.
Fire Fighting
Flash Point:101F,38C
Lower Limits:1.0%
Extinguishing Media:FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
SMOTHER FLAMES W/ONE OF ABOVE EXTING MEDIA. WATER MAY BE USED TO
COOL UNOPENED CNTNRS, BUT MUST PVNT (SUPDAT)
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARK OR OPEN FLAME ARE PRESENT.
Accidental Release
Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID INHAL OF
VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBENT MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN BUILDING DESIGNED & PROTECTED
FOR STOR OF LIQ W/NFPA CLASS II.
Other Precautions:AVOID BRTHG DUST/CHIPS FROM SANDING/BLASTING SURF
COATED W/THIS PROD. CHRONIC OVEREXPOS TO, AND MISUSE OF, SOLVENTS
HAS BEEN LINKED TO PERMANENT BRAIN & NERV SYSTEM DAMAGE.
Exposure Controls
Respiratory Protection:IN OUTDOOR/OPEN AREAS, W/UNRESTRICTED VENT,
NIOSH/ MSHA APPROVED FILTER RESPIRATOR TO REMOVE SOLID AIR BORNE
PARTICLES OF SPRAY DURING SPRAY APLLIC. RESTRICTED VENT AREAS,
NIOSH/MSHA APPRVD RESP I/ A/ W 29 CFR 1910.134 TO REMOVE (SUPDAT)
Ventilation:PROVIDE SUFFICIENT VENT, IN VOL & PATTERN, TO KEEP TLV &
LEL OF HAZ INGREDS BELOW LIM SPECIFIED & IN DECOMP PROD (SUPDAT
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:IMPERVIOUS CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE,
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
FIRE FIGHT PROC:SPREAD OF BURNING LIQ W/ WATER. RESP PROT:COMBINATION
OF PARTICULATES & VAPORS. VENT:DURING WELDING OR FLAME CUTTING ON
SURFACES COATED WITH THIS PRODUCT.
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:SEE INGS
Vapor Density:HVR/AIR
Spec Gravity:0.984
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:NOT KNOWN
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:45
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING AGENTS.
Stability Condition to Avoid:STORE AWAY FROM DIRECT HEAT, FLAME OR
SPARK.
Hazardous Decomposition Products:CO, CO2, CARIOUS HYDROCARBON
FRAGMENTS.
Disposal
Waste Disposal Methods:DISPOSE IN ACCRODANCE WITH LOCAL, STATE, AND
FEDERAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.